搭建动态拔号VPS服务器的步骤如下:
1、准备环境
确保你的计算机已经安装了操作系统(如Linux或Windows)。
安装SSH客户端,用于远程连接服务器。
2、购买VPS服务
选择一个可靠的VPS提供商,并购买一个适合你需求的VPS套餐。
获取VPS的IP地址、用户名和密码。
3、连接到VPS服务器
使用SSH客户端连接到VPS服务器。
输入以下命令进行身份验证:ssh 用户名@IP地址
,然后按回车键。
输入密码,然后按回车键。
4、更新系统软件包
在VPS上执行以下命令来更新系统软件包:
“sudo apt update
sudo apt upgrade -y
“
5、安装动态拔号软件
在VPS上执行以下命令来安装动态拔号软件(如pptpd):
“sudo apt install pptpd -y
“
6、配置动态拔号服务器
编辑pptpd的配置文件:sudo nano /etc/pptpd.conf
。
在配置文件中添加以下内容:
“ localip 192.168.0.100-200 remoteip 192.168.0.100-200 msdns 8.8.8.8 msdns 8.8.4.4 requiremschapv2 noauth nocrtscts nodigest nobsdcomp proxyarp refuseeap localipv6 fddd:aaaa::/96 range6 ::ffff:0:0/96 listenaddress ::ffff:0:0:1:12345/127 multilink default “ 保存并关闭文件。 7、启动动态拔号服务 在VPS上执行以下命令来启动动态拔号服务: “ “ 8、配置防火墙规则(可选) 如果需要允许外部访问VPN连接,可以配置防火墙规则,以下是示例规则: “ “ 如果不需要外部访问,可以跳过此步骤。 至此,你已经成功搭建了一个动态拔号VPS服务器,你可以根据需要进一步配置其他设置,如DHCP服务器、域名解析等,下面是两个与本文相关的问题与解答: 问题1:如何修改动态拔号服务器的IP地址范围? 答:要修改动态拔号服务器的IP地址范围,你需要编辑pptpd的配置文件(sudo systemctl start pptpd
sudo systemctl enable pptpd
sudo ufw allow 1723/tcp from any to any port 1723 proto tcp
sudo ufw allow 500/udp from any to any port 500 proto udp
/etc/pptpd.conf
),并将localip
和remoteip
字段的值更改为你想要的范围,将IP地址范围从192.168.0.100-200
改为192.168.1.100-200
,只需将行修改为:localip 192.168.1.100-200
和remoteip 192.168.1.100-200
,保存并关闭文件后,重新启动pptpd服务以使更改生效。
评论留言